Most RV campgrounds have a city water connection. This is a faucet at your campsite that allows you to connect your RV directly to a city water supply.
What is the difference between city water connection and fresh water connection on a camper?
City water is used when you are at a place that supplies water for you through the use of a faucet. Hook hose from faucet to city water inlet and you’ll have water when needed. Fresh water is used to fill up the water holding tank when you are going somewhere that doesn’t provide water.
How do I hookup my city water to my RV?
To hook up to campground water, find and remove the cap labeled “city water connection.” This connection runs the water directly to your pipes, bypassing the fill tank. Install your regulator and filter to the spigot, then thread your potable water hose to the filter.
What is fresh water connection on RV?
If you know there is going to be no city water before your trip use your on board water fill to fill up your holding tank. This connection is different than your city water connection and will be labelled as “Freshwater Connection”. The hose does not screw into this connection and just drops into the hole.
Why is my freshwater tank filling when connected to city water?
When the city water pressure feeds fresh water into the on-board fresh water tank it means one of two things: either a “quick fill” valve is left open (or is faulty), or the check valve in the outlet side of the water pump has failed. … It’s not necessary to replace the complete pump.
How often should I sanitize my RV water tank?
It is a good idea to sanitize the fresh water tank of an RV at least twice a year, or once every six months. If you are frequently on the road, however, it is better to do this once a month.
Should I leave my RV water pump on all the time?
Is it okay to leave the RV water pump on? Your water pump is okay to keep on because it’s pressure activated. Pressure activated means it only works while water is running. If you aren’t connected to an external water source, the pump is the only way to get water from your holding tank to your faucets.
Can I leave my RV water pump on all the time?
As an RV water pump is a pressure sensing device it should not operate at all when it is not being asked to do so. A water pump that cycles when no water is in use is one that is not working properly and needs immediate attention.
Should I leave my RV water heater on all the time?
It’s safe to leave your RV water heater on all the time, just like at home. You’ll want to make sure that there is always water in the heater.
Is RV hookup water potable?
So, is your RV water actually safe to drink? The good news is that, as long as the tank and system are properly cleaned and treated, tap water in the RV is perfectly safe to drink.
What are the red and blue hoses under RV?
They are the “low point” drains. Blue is the cold and red is the hot side. For those that winterize their RV they are used to drain all the water from the fresh water system.
What is the difference between fresh water tank and city water?
City water bypasses the fresh water holding tank completely. When using city water, you can keep the outside water spigot on all the time. … This way, the water pressure from the spigot pushes the water through your RV water system. So, no need to use your built-in water pump.
How do I know when my RV fresh water tank is full?
You can tell when your RV water tank is full by either watching the water-level gauge (if your model has one), listen for water coming from the overflow (if you fill using the city inlet), or if you have a gravity fill, the water will splash back.
Where is the fresh water tank on an RV?
Freshwater tanks should generally be located near the center of your RV, so that it’s easy to hook up to the many different components it’ll rely on: your sink, shower, etc. Usually, the RV’s center is the kitchen area.