Question: How do I make my fiberglass camper shine again?

How do you restore faded fiberglass?

Apply rubbing compound in circular motions directly on the oxidized areas, using a clean rag. Rub the rough oxidized areas until the gelcoat becomes smooth and begins to shine. Make sure you do not rub through the layer of gel coat and expose the fiberglass underneath. Rinse the surface clean and dry it with a towel.

How do you shine dull fiberglass?

One-part cleaner/wax products are a good place to start. These compounds are usually some form of wax combined with a very mild cleaner, a very mild abrasive compound and sometimes a lubricant. Applied with a buffer, they do a good job on mildly dulled or chalked finishes.

How do you restore an oxidized fiberglass RV?

To restore oxidized RV fiberglass, you simply need a little elbow grease and some polishing compound. Apply the polishing product with an ordinary non-scratch kitchen scrubby sponge. Work the polish into the surface by hand, and polish until you don’t feel any more resistance. Allow the polish to dry and haze over.

What is the best wax for a fiberglass RV?

5 Best Fiberglass RV Waxes In 2021

  • Best Overall: Thetford 32523 Premium RV Wax.
  • Best For Easy Application: MEGUIAR’S M6332 Flagship RV Wax.
  • Best For Oxidation Removal: MEGUIAR’S MG Fiberglass Oxidation Wax For RV.
  • Best Budget-Friendly: Gel-Gloss RV Wash and Wax.
  • Best For Restoring Shine: 3M Marine 09006 Wax For RV.
IT\'S AMAZING:  Frequent question: What are American motorhomes called?

How do you clean a fiberglass camper?

Wash the fiberglass with a sponge using a solution of 1 cup of liquid laundry detergent and 1 gallon of warm water. Rinse the soap off by spraying the RV with a garden hose. Allow the surface to dry naturally. Use a product called MEK and wipe down the fiberglass with it to remove grease and oils.

How do you polish a fiberglass RV?

As Wade demonstrates, restoring fiberglass gel coat by hand is a four-step process:

  1. Apply product to a simple kitchen non-scratch scrub sponge.
  2. Work in the product (while wet) by hand (see product recommendations below video)
  3. Polish until you don’t feel any resistance.
  4. Wipe off excess with a clean, dry rag.

How do you clean chalky fiberglass?

Remove all the chalky areas of fiberglass using rubbing compound. Rub the affected areas in hard, circular motions until the surface is completely smooth. Rinse the surface with clean water and dry the fiberglass with a towel.

Categories RV